Mil-W-4088 Webbing
MIL-W-4088 Nylon Webbing is commonly used for parachute harnesses, waist straps, carrying handles and drag handles.
Mil-W-4088 Nylon Webbing is available in the following types: Type 1A, Type 2, Type 3, Type 4, Type 7, Type 8, Type 12, and Type 13.
* IR Compliance - Available in all Military Colors
| Type | Class | Color | Width (inches) |
Thickness (inches) |
Tensile strength (lbs) |
|
|---|---|---|---|---|---|---|
| XIII | 1A | Olive Drab | 1.75" | 0.08" | 7000 | DETAIL |
| XIII | 1A | Black | 1.75" | 0.08" | 7000 | DETAIL |
* For any other Mil-Spec or Commercial Elastic not listed above, please contact us
Comparison of shuttle and shuttleless looms
The shuttle loom is a weaving machine which uses the traditional shuttle (wooden shuttle or plastic shuttle) weft insertion. The shuttle is large in volume and heavy in weight, and is repeatedly projected by the traffic, the machine vibrates greatly, the noise is high, the speed is slow, the efficiency is low.
The weft-insertion method of shuttle-less loom is various, including Rapier, Jet (Jet, water spray), projectile, multi spindle mouth (multiphase) and knitting. Advantages of shuttle less looms:High labour and machine productivity due to high speed and wider width of looms.
Webbing produced on shuttle and shuttleless looms visual differences may be subtle。
Our PIA-W-4088 meet the demands of the parachute industry Class 1a (critical use, shuttleless / needle loom), and Class 2 (non-critical use, shuttleless / needle loom) material.
The shuttle loom is a weaving machine which uses the traditional shuttle (wooden shuttle or plastic shuttle) weft insertion. The shuttle is large in volume and heavy in weight, and is repeatedly projected by the traffic, the machine vibrates greatly, the noise is high, the speed is slow, the efficiency is low.
The weft-insertion method of shuttle-less loom is various, including Rapier, Jet (Jet, water spray), projectile, multi spindle mouth (multiphase) and knitting. Advantages of shuttle less looms:High labour and machine productivity due to high speed and wider width of looms.
Webbing produced on shuttle and shuttleless looms visual differences may be subtle。
Our PIA-W-4088 meet the demands of the parachute industry Class 1a (critical use, shuttleless / needle loom), and Class 2 (non-critical use, shuttleless / needle loom) material.
Resin Impregnated
Class R= Resin impregnated
Class L = Latex impregnated
Treatment that can apply to all types of MIL-W-4088
MIL-W-4088 nylon webbing is very flat and smooth and slightly stiff due to resin impregnation for abrasion resistance via MIL-W-27265. Perfect for edge binding and high wear areas.
Class R= Resin impregnated
Class L = Latex impregnated
Treatment that can apply to all types of MIL-W-4088
MIL-W-4088 nylon webbing is very flat and smooth and slightly stiff due to resin impregnation for abrasion resistance via MIL-W-27265. Perfect for edge binding and high wear areas.
Other Military Specification Webbing
Perhaps you also need mil-w-5625 webbing for use with mil-w-4088, check out mil-w-5625 webbing directly.
We also have a full line of mil-spec nylon webbing that you can find here. There are even military specification ropes, Velcro straps, etc.
You can make a one-stop purchase, and we are ready to help you.
Perhaps you also need mil-w-5625 webbing for use with mil-w-4088, check out mil-w-5625 webbing directly.
We also have a full line of mil-spec nylon webbing that you can find here. There are even military specification ropes, Velcro straps, etc.
You can make a one-stop purchase, and we are ready to help you.
Breaking Strength Test
We have been providing services to the military.
producing military webbing that meets strict international and local standards.
Rigorous testing in our in-house laboratory to ensure the quality of large shipments.
Tensile Testing Machine
General Applications For Mil-W-4088 Webbing
MIL-W-4088 Nylon Webbing is commonly used for parachute harnesses, tactical belt, carrying handles and drag handles.
Customized webbing service
JUDE is a manufacturer of functional webbing solutions for many market sectors. With a variety of manufacturing processes and capabilities, post-treatment of webbing, including:waterproof, flame retardant, IRR etc.
We also dye, cut, print, finish, coat, sew and assemble to deliver a webbing product specific to your requirements.Learn more
Our Factory
With a daily production capacity of up to 100,000 meters, we supply millions of meters of webbing each year to parachute equipment manufacturers around the world, including the USA, UK, France, Singapore, Thailand, etc.
200+ Weaving Machine
10+ Dyeing Machine
10+ Printing Machine
Factory production qualification
